Description
What's so special about this hospital bed air mattress?
The Proteckt Aire combines low air loss and alternating pressure therapies in one system.
Alternating pressure mattresses are designed to provide pressure relief for those who spend a good deal of time in a hospital bed, and who are at moderate risk of developing bedsores, by alternately inflating and deflating air cells to mimic the movement of a patient's body. The Protekt® Aire 6000AB is the preferred choice by clinicians treating stage I-IV pressure ulcers.
But that's not all. The low air loss function helps keep skin cool and dry.
This combination of low air loss and alternating pressure therapies provide an unparalleled pressure redistribution surface.
But there's more to love!
The Protekt® Aire 6000AB mattress unique cell-on-cell design incorporates a one-way valve which will hold air in the 4" of the cells in the event of a power failure.
And for safety, its raised side air bolsters helps prevent patient roll out and the risk of entrapment while the CPR valve provides rapid deflation of mattress.
Finally, it's easy to set up and operate.
MATTRESS & COVER FEATURES
- Raised side perimeter air bolsters mitigates accidental patient roll-outs, and reduces the risk of entrapment
- Center cut-out in air bolsters enables safe ingress and egress from the mattress
- Unique cell-on-cell design incorporates a one way valve which will hold air in the lower 4" of the cells in the event of a power failure
- 20 individual air bladders
- Laser holes in air bladders allow low air loss to keep the patient cool and dry
- Pillow top, static head section prevents head and neck from unnecessary movement during alternating mode
- Nylon top cover is fluid resistant, anti-microbial/anti-bacterial and quilted for added comfort
- Transport connector locks in air for easy patient transfers
DELUXE DIGITAL PUMP FEATURES
- User friendly LED touch panel provids easy access to 4 alternating cycles 10, 15, 20 & 25 minutes allowing clinicians to customize therapy to each patient's therapeutic requirements
- Pump alternately inflates and deflates air cells in mattress overlay to create different patient support points
- Digital 8 LPM LED pump includes auto firm, seat inflate and static modes
- Pump alternately inflates and deflates air bladders
- Seat-inflate feature helps protect the patient when they are in the fowler (semi-seated) position
- Auto firm mode for quick inflation
- Static mode provides firm support for egress or ingress from mattress or side edge seating
- 3 audible and visual alarms; low pressure, power failure and alternating failure
- Adjustable hanging brackets
- Limited 2 year warranty
SPECS
- Dimensions: 80"L x 36"W x 8"H (11"H sides) or 84"L x 36"W x 8"H (11"H sides)
- Weight capacity is 450 lbs.
- Limited 2 year warranty
CLICK HERE FOR OWNER'S MANUAL
To speak with a customer service representative, call 1-800-956-6616
- Alternating pressure mattress helps prevent and treat pressure sores
- Supports up to 450 lbs.
- Cell-on-cell design holds air in case of power failure
- User friendly LED touch panel provides easy access to 4 alternating cycles
- Raised side air bolsters helps prevent patient roll out
- Low air loss function helps keep skin cool and dry
Specifications
Power Supply: | 120 V, 50 Hz, 1 A |
Air Output: | 8 LPM |
Pressure Range: | 20 mmHg - 55 mmHg |
Cycle Time: | 10, 15, 20 or 25 min. |
Fuse: | 250 V, 1 A |
Pump Dimensions: | 12.2" x 4.9" x 8.3" |
Pump Weight: | 5.5 lbs. |
Mattress Dimensions: | 80"L x 36"W x 8"H (11"H sides) 84"L x 36"W x 8"H (11"H sides) |
Mattress Construction: | Top Cover: Quilted Nylon/ PU Air Cells: 20 ea (80"L), Nylon/ PVC w/ Cell-on-Cell Base 11"H Side Air Bolsters Botton Cover: Nylon/ PVC |
Weight Capacity: | 450 lbs. |
Limited Warranty: | Pump: 2 years Mattress: 2 years |
Additional Information
Mattress Features: |
Alternating Pressure |
Mattress Features: |
Low Air Loss |
Mattress Features: |
Raised Sides |
Mattress Height: |
8" |
Mattress Width: |
35" - 36" |
Mattress Length: |
80" |
Mattress Length: |
84" |
User Weight: |
400 - 500 lbs. |
Pump Flow Rate: |
8 - 12 lpm |
Pump Features: |
Digital Display |
Pump Features: |
Auto Firm |
Pump Features: |
Seat Inflate |