Description
The Lumex Select LS200 Alternating Pressure Low Air Loss Mattress System is a specialized mattress replacement unit that utilizes low air loss technology with a specialized mattress design that provides pressure management for the treatment of pressure ulcers. The 2:1 alternating function provides active prevention for pressure relief, especially for those in acute care and long term care settings (the cells inflate and deflate in a 2:1 cycle, meaning 1/2 of the body is always supported at any one time). The Lumex Select LS200 offers "cell on cell therapy", whereby the air cell is split in two where the bottom cells do not deflate if the upper cells are completely deflated in order to provide extra protection and low pressure comfort for the patient in the event of a power failure and the mattress deflates.
Features
- Alternating time is set to 12 minutes
- Static function stops the alternating function, providing only low air loss therapy
- Low Pressure failures will produce an audio alarm for added safety which can also be temporarily muted
- Foot board mounting hanger provides convenient placement on the bed
- The soft-firm adjustment knob allows the caregiver to adjust the firmness or softness of the surface for optimal comfort
- Quick release CPR valve
- Fluid resistant, low shear, quilted cover
- Low pressure and power failure indicators and audible alarms
- Cell-on-cell design ensures that mattress will hold air in the lower cells in the event of a power failure
- Bottom cells do not deflate if the upper cells are completely deflated in order to provide extra protection and low pressure comfort for the patient in the event of a power failure and the mattress deflates.
- Flow rate direct from pump is 4.5 LPM
- Mattress size is 80"L x 36"W x 8"H
- 350 lb. maximum weight capacity
- Lumex limited 2 year warranty on pump, 1 year on mattress
CLICK HERE FOR OWNER'S MANUAL
To speak with a customer service representative, call 1-800-956-6616
- Alternating pressure and low air loss
- 4.5 LPM pump inflates and deflates cells
- Adjustable mattress firmness
- Mattress holds air in lower cells in case of power failure
- Fluid resistant, low shear quilted cover
- Mattress dimensions: 80"L x 36"W x 8"H
- Supports up to 350 lbs.
Specifications
| MATTRESS | |
| Dimensions: | 36" x 80" x 8" |
| Weight: | 20 lbs. |
| Weight Capcity: | 350 lbs. |
| Cover/Cells Material: | Nylon/Polyurethane |
| Warranty: | Limited 1 year |
| PUMP | |
| Dimensions: | 10.16" x 4.6" x 6.38" |
| Weight: | 4.85 lbs. |
| Electrical: | 110-120 V, 60 Hz |
| Fuse Rating: | T1AL, 250V |
| Operating Temperature: | 59°F - 104°F, 30-75% RH |
| Storage Temperature: | 41°F - 140°F, 30-75% RH |
| Air Output: | 4.5 LPM |
| Cycle Time: | 12 minutes |
| Warranty: | Limited 2 years |
Additional Information
Mattress Features: |
Alternating Pressure |
Mattress Features: |
Low Air Loss |
Mattress Height: |
8" |
Mattress Width: |
35" - 36" |
Mattress Length: |
80" |
User Weight: |
Up to 400 lbs. |
Pump Flow Rate: |
4 - 6 lpm |
_nonreturnable: |
yes |
